The gap between smart home products and a smart home that works is almost always the wiring behind the wall. Smart switches need a neutral conductor that plenty of older Polk County homes never had at the switch box. Automated shades need power at the window. Hubs, access points, and cameras need somewhere to live and something to power them.
We handle the electrical layer: the neutrals, the dedicated circuits, the low-voltage runs, the in-wall power for shades and displays, and the switch and dimmer installations. That is the part that is expensive to retrofit later and invisible when done right.
Because we also install security alarms, video surveillance, and access control, we can integrate the whole thing rather than leaving you to make three vendors talk to each other.
Serving Polk County: Lake Wales, Winter Haven, Bartow, Haines City, Lakeland, Dundee, Frostproof, Auburndale, Polk City, Davenport, Fort Meade, Lake Alfred, and the surrounding Central Florida communities. Call (863) 676-0198 to book.
“Absolutely stellar service! Kincaid Electric came out the same day to fix a major panel issue. The technician was polite, explained everything clearly, and the price was exactly what they quoted.”
What We Install
Lighting And Control
- Smart switches, dimmers, and keypads
- Whole-home scene and zone control
- Neutral wire runs to existing switch boxes
- Occupancy and daylight sensing
Comfort And Convenience
- Automated shades and in-wall shade power
- Smart thermostat wiring, including C-wire runs
- Smart ceiling fan controls
- Garage and gate automation power
Infrastructure
- Structured low-voltage cabling
- Power and mounting for hubs and access points
- Camera and doorbell power
- Dedicated circuits for AV and network racks
Ready to book smart home?
Licensed, family owned, and working out of Lake Wales since 1973. Upfront pricing, and a real person on the phone.
Other Residential Services
Smart Home Across Polk County
The same crew covers the whole service area. Pick your city for local detail, or just call us.
Smart Home FAQs
My smart switch will not work. Why?
Nine times out of ten there is no neutral conductor in the switch box. Most smart switches need one to power their radio continuously. We can usually pull a neutral to the box, or fit a switch designed to work without one, depending on the wiring you have.
Do you install a specific brand?
We work with the major platforms rather than pushing one. Tell us what ecosystem you are already in, or what you are considering, and we will tell you what the wiring implications are for each.
Can you integrate this with my alarm and cameras?
Yes. We are factory authorised Honeywell security alarm dealers and we install video surveillance and access control, so lighting, security, and cameras can be specified and wired as one system rather than three.
Is it worth doing during a remodel?
Considerably. Running neutrals, low-voltage cable, and shade power is straightforward with walls open and awkward afterwards. If you are remodelling anyway, this is the moment to at least run the infrastructure even if you add the devices later.
What are the advantages and disadvantages of home automation?
On the advantage side: lights and climate that respond to schedules and occupancy rather than to memory, visibility of the house when you are away, and genuine energy savings when it is set up properly. The disadvantages are worth naming honestly. It adds parts that can fail, it depends on a network, cheap devices get abandoned by their manufacturers, and a system that is fiddly to live with gets switched off. Keeping the automation simple and the wiring solid avoids most of that.
What can home automation control?
In practice: lighting and scenes, dimming, ceiling fans, thermostats, shades, garage and gate operation, door locks, cameras, alarm arming, irrigation, and pool equipment. What we handle is the electrical layer underneath all of it. That means the neutrals at the switch boxes, the dedicated circuits, the low-voltage runs, the in-wall power for shades and displays, and the mounting and power for hubs and access points.
Should I install a wireless or hardwired automation system?
Wireless is cheaper, quicker, and fine for lighting and thermostats in most homes. Hardwired is more reliable and worth it for anything you cannot afford to have drop off the network, particularly cameras, access points, and the backbone of a larger system. Most of the homes we do end up mixed. The rule we use is simple: run cable while walls are open, because it costs very little then and a great deal later.
Do I need an internet connection?
For local control, usually not. Most hubs and smart switches keep working on the local network, so lights, scenes, and schedules run with the internet down. What you lose is remote access from your phone, voice assistants, and cloud notifications. If remote visibility matters to you, the internet connection and its own backup power are part of the system rather than an afterthought.
How secure is my data?
That depends far more on the platform you choose and how it is set up than on the wiring. The practical measures we recommend are a separate network segment for cameras and devices, changing every default password, keeping firmware current, and choosing established platforms that publish security updates rather than the cheapest device on the shelf. We will tell you where a particular product sits on that before you buy a house full of them.